OptiMill®-Tro-Inox
The OptiMill-Tro-Inox® corner milling cutter has been specially developed for trochoidal machining of stainless steel. The cutter has six cutting edges with optimized unevenness and geometry. These features, combined with the balancing of the cutting part to G2.5, ensure reduced vibration and high surface finishes. Material-specific chip splitters ensure trouble-free chip removal.
Selected facets:
- OptiMill®-Tro-Inox family
- Expert-Line Product category
-
Material charateristics
- 0.32 Corner bevel width Cx45°
-
Material charateristics
-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
-
OptiMill®-Tro-Inox
l1: 108 mm; l2: 48 mm; l3: 55 mm; d1: 16 mm; d2: 16 mm; Cx45°: 0,32 mm; z: 6; SCM291-1600Z06R-F0032HB3-HP826
Order number: 31504986
In Stock -
OptiMill®-Tro-Inox
l1: 92 mm; l2: 32 mm; l3: 42 mm; d1: 16 mm; d2:16 mm; R: 0,32 mm; z: 6; SCM292-1600Z06R-F0032HB2-HP826
Order number: 31348631
In Stock -
OptiMill®-Tro-Inox
l1: 123 mm; l2: 64 mm; l3: ; d1: 16 mm; d2:16 mm; R: 0,32 mm; z: 6; SCM292-1600Z06R-F0032HB4-HP826
Order number: 31348652
In Stock -
OptiMill®-Tro-Inox
l1: 136 mm; l2: 80 mm; l3: ; d1: 16 mm; d2:16 mm; R: 0,32 mm; z: 6; SCM292-1600Z06R-F0032HB5-HP826
Order number: 31348660
In Stock -
OptiMill®-Tro-Inox
l1: 108 mm; l2: 48 mm; l3: 55 mm; d1: 16 mm; d2:16 mm; R: 0,32 mm; z: 6; SCM292-1600Z06R-F0032HB3-HP826
Order number: 31348642
currently out of stockInform me when article is back in stock
