OptiMill®-3D-HF
The OptiMill®-3D-HF high feed milling cutter was specially developed for roughing components with a hardness of up to 55 HRC. The high feed cutter is characterised by its proven face geometry and smooth running and is ideally suited for high feed machining with large metal removal rates and high process reliability.
Ausgewählte Filter:
Alle Filter zurücksetzen
Material charateristics-
Milling type
-
Product Family
-
Diameter (d1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product category
(6)
(4)
(4)
(6)-
OptiMill®-3D-HF
l1: 50 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 3 ; MHF100-020-0150-0600X050-HP806
Bestellnummer: 31150882
sofort lieferbar -
OptiMill®-3D-HF
l1: 50 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 3 ; MHF100-020-0150-1000X050-HP806
Bestellnummer: 31150883
sofort lieferbar -
OptiMill®-3D-HF
l1: 50 mm; l2: 3 mm; l3: 9 mm; d1: 3 mm; d2: 4 mm; R: 0,15 mm; z: 3 ; MHF100-030-0200-0900X050-HP806
Bestellnummer: 31150886
sofort lieferbar -
OptiMill®-3D-HF
l1: 50 mm; l2: 3 mm; l3: 15 mm; d1: 3 mm; d2: 4 mm; R: 0,15 mm; z: 3 ; MHF100-030-0200-1500X050-HP806
Bestellnummer: 31150887
sofort lieferbar -
OptiMill®-3D-HF
l1: 50 mm; l2: 3 mm; l3: 9 mm; d1: 3 mm; d2: 4 mm; R: 0,15 mm; z: 4 ; MHF101-030-0200-0900X050-HP806
Bestellnummer: 31150920
sofort lieferbar -
OptiMill®-3D-HF
l1: 50 mm; l2: 3 mm; l3: 15 mm; d1: 3 mm; d2: 4 mm; R: 0,15 mm; z: 4 ; MHF101-030-0200-1500X050-HP806
Bestellnummer: 31150921
sofort lieferbar
