ECU-G-Drill
The straight fluted ECU-G-Drill has four guide chamfers for support in the bore and is suitable for machining grey cast iron and non-ferrous metals.
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(8)
(8)-
ECU-G-Drill
d1: 4,8 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2 ; internal cooling; SCD211-0480-2-4-130HA05-HU610
Order number: 30392622
In Stock -
ECU-G-Drill
d1: 5,5 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2 ; internal cooling; SCD211-0550-2-4-130HA05-HU610
Order number: 30392630
In Stock -
ECU-G-Drill
d1: 5,7 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2 ; internal cooling; SCD211-0570-2-4-130HA05-HU610
Order number: 30392632
In Stock -
ECU-G-Drill
d1: 5,8 mm; d2: 6 mm; l1: 95 mm; l2: 57 mm; l3: 48 mm; z: 2 ; internal cooling; SCD211-0580-2-4-130HA08-HU610
Order number: 30392739
In Stock -
ECU-G-Drill
d1: 6,8 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2 ; internal cooling; SCD211-0680-2-4-130HA05-HU610
Order number: 30392643
In Stock -
ECU-G-Drill
d1: 7,4 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2 ; internal cooling; SCD211-0740-2-4-130HA05-HU610
Order number: 30392649
In Stock -
ECU-G-Drill
d1: 7,5 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2 ; internal cooling; SCD211-0750-2-4-130HA05-HU610
Order number: 30392650
In Stock -
ECU-G-Drill
d1: 11,6 mm; d2: 12 mm; l1: 162 mm; l2: 114 mm; l3: 96 mm; z: 2 ; internal cooling; SCD211-1160-2-4-130HA08-HU610
Order number: 30392797
In Stock
