MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 14.0 Shank diameter (d2)
- 18.0 Shank diameter (d2)
- 16.0 Shank diameter (d2)
- MEGA-180°-Drill-Alu Product Family
- MEGA-180°-Drill-Alu family
-
Product Family
-
Material charateristics
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Tip angle
-
Product category
-
Bore tolerance
(6)-
MEGA-180°-Drill-Alu
d1: 13 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2 ; internal cooling; SCD241-1300-2-4-180HA03-HU630
Order number: 30382978
In Stock -
MEGA-180°-Drill-Alu
d1: 13 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD241-1300-2-4-180HA05-HU630
Order number: 30383096
In Stock -
MEGA-180°-Drill-Alu
d1: 14 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD241-1400-2-4-180HA05-HU630
Order number: 30383099
In Stock -
MEGA-180°-Drill-Alu
d1: 14,5 mm; d2: 16 mm; l1: 113 mm; l2: 63 mm; l3: 43 mm; z: 2 ; internal cooling; SCD241-1450-2-4-180HA03-HU630
Order number: 30382982
In Stock -
MEGA-180°-Drill-Alu
d1: 15 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; internal cooling; SCD241-1500-2-4-180HA05-HU630
Order number: 30383102
In Stock -
MEGA-180°-Drill-Alu
d1: 17 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2 ; internal cooling; SCD241-1700-2-4-180HA03-HU630
Order number: 30382990
In Stock
