MEGA-180°-Drill-Alu

  • Product image MEGA-180°-Drill-Alu
  • Technical drawing MEGA-180°-Drill-Alu

Durchmesser d1 (mm)

17.0

Ihr Stückpreis

*Login erforderlich

Bestellnummer

30382990

Menge

Ihrem Warenkorb hinzugefügt

Unsere Produktempfehlung:

Produktbeschreibung

The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.

Materialeignung

Technische Daten

Schneidstoff
HU630  
Produktklasse
Expert-Line  
Bohrtiefe
3xD  
d1
17   mm
d2
18   mm
l1
121   mm
l2
71   mm
l3
49   mm
l4
48   mm
Kühlmittelaustritt
innere Kühlmittelzufuhr  
Anzahl Schneiden (z)
2  
Schafttoleranz
h6  
Bohrungstoleranz
≥ IT 9  
Schaftform
HA  
Spitzenwinkel
180   °
Seitenspanwinkel
30   °
Materialgruppe
R8

Downloads

3D Hüllkontur in stp
30382990_607936323-000-00-E43.STP
Technische Zeichnung in tif
30382990_607936324-000-00-ED1.TIF
Technische Zeichnung in pdf
30382990_607936324-000-00-ED1.PDF
Technische Zeichnung in dxf
30382990_607936324-000-00-ED1.DXF
Cutting data recommendations
30382990_MEGA-180°-Drill-Alu_EN.pdf