OptiMill®-3D-HF
The OptiMill®-3D-HF high feed milling cutter was specially developed for roughing components with a hardness of up to 55 HRC. The high feed cutter is characterised by its proven face geometry and smooth running and is ideally suited for high feed machining with large metal removal rates and high process reliability.
Selected facets:
Remove all filters-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
(6)
(3)
(6)
(3)
(6)-
OptiMill®-3D-HF
l1: 100 mm; l2: 12 mm; l3: 48 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF101-120-1000-4800X100-HP806
Order number: 31150937
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 12 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 3 ; MHF100-120-1000-6000X100-HP806
Order number: 31150914
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 12 mm; l3: 36 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF101-120-1000-3600X075-HP806
Order number: 31150936
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 12 mm; l3: 48 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 3 ; MHF100-120-1000-4800X100-HP806
Order number: 31150913
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 12 mm; l3: 36 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 3 ; MHF100-120-1000-3600X075-HP806
Order number: 31150912
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 12 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF101-120-1000-6000X100-HP806
Order number: 31150938
In Stock
