OptiMill®-3D-CR-Alu
The OptiMill®-3D-CR-Alu corner radius milling cutter was specially developed for machining high-strength aluminium alloys. Thanks to its positive and partially polished cutting edges, it is ideally suited for high-precision machining of 3D contours.
Selected facets:
Remove all filters-
Material charateristics
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
(7)-
OptiMill®-3D-CR-Alu
l1: 75 mm; l2: 6 mm; l3:30mm; d1: 6 mm; d2:6 mm; R: 1 mm; z: 2; MCR120-060-0100-3000X075-HP807
Order number: 31153222
In Stock -
OptiMill®-3D-CR-Alu
l1: 57 mm; l2: 6 mm; l3:21mm; d1: 6 mm; d2:6 mm; R: 1 mm; z: 2; MCR120-060-0100-2100X057-HP807
Order number: 31153221
In Stock -
OptiMill®-3D-CR-Alu
l1: 63 mm; l2: 8 mm; l3:30mm; d1: 8 mm; d2:8 mm; R: 1 mm; z: 2; MCR120-080-0100-3000X063-HP807
Order number: 31153224
In Stock -
OptiMill®-3D-CR-Alu
l1: 90 mm; l2: 8 mm; l3:50mm; d1: 8 mm; d2:8 mm; R: 1 mm; z: 2; MCR120-080-0100-5000X090-HP807
Order number: 31153225
In Stock -
OptiMill®-3D-CR-Alu
l1: 72 mm; l2: 10 mm; l3:32mm; d1: 10 mm; d2:10 mm; R: 1 mm; z: 2; MCR120-100-0100-3200X072-HP807
Order number: 31153228
In Stock -
OptiMill®-3D-CR-Alu
l1: 100 mm; l2: 10 mm; l3:40mm; d1: 10 mm; d2:10 mm; R: 1 mm; z: 2; MCR120-100-0100-4000X100-HP807
Order number: 31153229
In Stock -
OptiMill®-3D-CR-Alu
l1: 100 mm; l2: 10 mm; l3: 60 mm; d1: 10 mm; d2: 10 mm; R: 1 mm; z: 2; MCR120-100-0100-6000X100-HP807
Order number: 31153230
In Stock
