OptiMill®-3D-HF-Hardened
The OptiMill®-3D-HF-Hardened high feed milling cutter was specially developed for roughing and finishing hardened components with a hardness of up to 66 HRC. Due to the innovative face geometry, the milling cutter achieves very high surface qualities even with interrupted cutting.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Cooling
-
Product Family
-
Product category
(9)
(9)
(8)-
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-0600X050-HP810
Order number: 31150940
In Stock -
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-1000X050-HP810
Order number: 31150941
In Stock -
OptiMill®-3D-HF-Hardened
l1: 75 mm; l2: 12 mm; l3: 36 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 6 ; MHF103-120-1110-3600X075-HP810
Order number: 31150972
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 12 mm; l3: 48 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 6 ; MHF103-120-1110-4800X100-HP810
Order number: 31150973
In Stock -
OptiMill®-3D-HF-Hardened
l1: 75 mm; l2: 12 mm; l3: 36 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF102-120-1110-3600X075-HP810
Order number: 31150960
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 12 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF102-120-1110-6000X100-HP810
Order number: 31150962
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 12 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 6 ; MHF103-120-1110-6000X100-HP810
Order number: 31150974
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-1000X060-HP810
Order number: 31150943
currently out of stockInform me when article is back in stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-0600X060-HP810
Order number: 31150942
currently out of stockInform me when article is back in stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 12 mm; l3: 48 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF102-120-1110-4800X100-HP810
Order number: 31150961
currently out of stockInform me when article is back in stock
