OptiMill®-3D-HF
The OptiMill®-3D-HF high feed milling cutter was specially developed for roughing components with a hardness of up to 55 HRC. The high feed cutter is characterised by its proven face geometry and smooth running and is ideally suited for high feed machining with large metal removal rates and high process reliability.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Shank type
-
Cooling
-
Product Family
-
Product category
(6)
(3)
(6)
(2)
(2)-
OptiMill®-3D-HF
l1: 60 mm; l2: 6 mm; l3: 24 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 4 ; MHF101-060-0500-2400X060-HP806
Order number: 31150929
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 6 mm; l3: 18 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 3 ; MHF100-060-0500-1800X060-HP806
Order number: 31150904
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 6 mm; l3: 18 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 4 ; MHF101-060-0500-1800X060-HP806
Order number: 31150928
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 16 mm; l3: 48 mm; d1: 16 mm; d2: 16 mm; R: 0,8 mm; z: 4 ; MHF101-160-1000-4800X100-HP806
Order number: 31150939
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 16 mm; l3: 48 mm; d1: 16 mm; d2: 16 mm; R: 0,8 mm; z: 3 ; MHF100-160-1400-4800X100-HP806
Order number: 31150915
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 6 mm; l3: 24 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 3 ; MHF100-060-0500-2400X060-HP806
Order number: 31150905
currently out of stockInform me when article is back in stock
