OptiMill®-3D-HF-Hardened
The OptiMill®-3D-HF-Hardened high feed milling cutter was specially developed for roughing and finishing hardened components with a hardness of up to 66 HRC. Due to the innovative face geometry, the milling cutter achieves very high surface qualities even with interrupted cutting.
Selected facets:
- 0.8 Corner radius (R)
- external cooling Cooling
- 0.1 Corner radius (R)
- OptiMill®-3D-HF-Hardened family
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Cooling
-
Product Family
-
Product category
(5)
(5)
(6)-
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-0600X050-HP810
Order number: 31150940
In Stock -
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-1000X050-HP810
Order number: 31150941
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-0600X060-HP810
Order number: 31150942
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-1000X060-HP810
Order number: 31150943
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 16 mm; l3: 48 mm; d1: 16 mm; d2: 16 mm; R: 0,8 mm; z: 4 ; MHF102-160-1470-4800X100-HP810
Order number: 31150963
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 16 mm; l3: 48 mm; d1: 16 mm; d2: 16 mm; R: 0,8 mm; z: 6 ; MHF103-160-1470-4800X100-HP810
Order number: 31150975
In Stock
