OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Material charateristics
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
(8)-
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,9 mm; l3:12 mm; d1: 0,6 mm; d2:4 mm; R: 0,3 mm; z: 2; MBN110-006-0030-1200X050-HC115
Order number: 31152822
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,9 mm; l3:1,2 mm; d1: 0,6 mm; d2:4 mm; R: 0,3 mm; z: 2; MBN110-006-0030-0120X050-HC115
Order number: 31152817
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,9 mm; l3:3,5 mm; d1: 0,6 mm; d2:4 mm; R: 0,3 mm; z: 2; MBN110-006-0030-0350X050-HC115
Order number: 31152818
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,9 mm; l3:5 mm; d1: 0,6 mm; d2:4 mm; R: 0,3 mm; z: 2; MBN110-006-0030-0500X050-HC115
Order number: 31152819
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,9 mm; l3:7 mm; d1: 0,6 mm; d2:4 mm; R: 0,3 mm; z: 2; MBN110-006-0030-0700X050-HC115
Order number: 31152820
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,9 mm; l3:10 mm; d1: 0,6 mm; d2:4 mm; R: 0,3 mm; z: 2; MBN110-006-0030-1000X050-HC115
Order number: 31152821
In Stock -
OptiMill®-3D-BN-Graphite
l1: 130 mm; l2: 12 mm; l3: 85 mm; d1: 12 mm; d2: 12 mm; R: 6 mm; z: 3; MBN111-120-0600-8500X130-HC116
Order number: 31152886
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 12 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 6 mm; z: 3; MBN111-120-0600-6000X100-HC116
Order number: 31152885
In Stock
