OptiMill®-3D-HF
The OptiMill®-3D-HF high feed milling cutter was specially developed for roughing components with a hardness of up to 55 HRC. The high feed cutter is characterised by its proven face geometry and smooth running and is ideally suited for high feed machining with large metal removal rates and high process reliability.
Selected facets:
Remove all filters-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Shank type
-
Cooling
-
Product Family
-
Product category
(6)
(3)
(6)
(2)-
OptiMill®-3D-HF
l1: 75 mm; l2: 10 mm; l3: 40 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 3 ; MHF100-100-0850-4000X075-HP806
Order number: 31150910
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 10 mm; l3: 30 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 3 ; MHF100-100-0850-3000X075-HP806
Order number: 31150909
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 10 mm; l3: 30 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 4 ; MHF101-100-0850-3000X075-HP806
Order number: 31150933
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 10 mm; l3: 50 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 4 ; MHF101-100-0850-5000X100-HP806
Order number: 31150935
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 10 mm; l3: 40 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 4 ; MHF101-100-0850-4000X075-HP806
Order number: 31150934
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 10 mm; l3: 50 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 3 ; MHF100-100-0850-5000X100-HP806
Order number: 31150911
In Stock
