OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,6 mm; l3:1,2 mm; d1: 0,4 mm; d2:4 mm; R: 0,2 mm; z: 2; MBN110-004-0020-0120X050-HC115
Order number: 31152809
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,6 mm; l3:5 mm; d1: 0,4 mm; d2:4 mm; R: 0,2 mm; z: 2; MBN110-004-0020-0500X050-HC115
Order number: 31152811
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,6 mm; l3:2,5 mm; d1: 0,4 mm; d2:4 mm; R: 0,2 mm; z: 2; MBN110-004-0020-0250X050-HC115
Order number: 31152810
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 2,3 mm; l3:15 mm; d1: 1,5 mm; d2:4 mm; R: 0,75 mm; z: 2; MBN110-015-0075-1500X050-HC116
Order number: 31152835
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 2,3 mm; l3:20 mm; d1: 1,5 mm; d2:4 mm; R: 0,75 mm; z: 2; MBN110-015-0075-2000X050-HC116
Order number: 31152836
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 2,3 mm; l3:10 mm; d1: 1,5 mm; d2:4 mm; R: 0,75 mm; z: 2; MBN110-015-0075-1000X050-HC116
Order number: 31152834
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 2,3 mm; l3:25 mm; d1: 1,5 mm; d2:4 mm; R: 0,75 mm; z: 2; MBN110-015-0075-2500X075-HC116
Order number: 31152838
In Stock
