OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 12 mm; l3:20 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 2; MBN110-060-0300-2000X075-HC116
Order number: 31152855
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 12 mm; l3:25 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 2; MBN110-060-0300-2500X075-HC116
Order number: 31152856
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 12 mm; l3:45 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 2; MBN110-060-0300-4500X100-HC116
Order number: 31152858
In Stock -
OptiMill®-3D-BN-Graphite
l1: 130 mm; l2: 4,5 mm; l3:85 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 3; MBN111-060-0300-8500X130-HC116
Order number: 31152878
In Stock -
OptiMill®-3D-BN-Graphite
l1: 60 mm; l2: 4,5 mm; l3:30 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 3; MBN111-060-0300-3000X060-HC116
Order number: 31152875
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 4,5 mm; l3:40 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 3; MBN111-060-0300-4000X075-HC116
Order number: 31152876
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 12 mm; l3:60 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 2; MBN110-060-0300-6000X100-HC116
Order number: 31152859
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 4,5 mm; l3:60 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 3; MBN111-060-0300-6000X100-HC116
Order number: 31152877
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 12 mm; l3:30 mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 2; MBN110-060-0300-3000X075-HC116
Order number: 31152857
In Stock
