OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
Remove all filters-
Milling type
-
Product Family
-
Material charateristics
-
Diameter (d1)
-
-
Shank diameter (d2)
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product category
(14)-
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,6 mm; l3:2,5mm; d1: 0,4 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-004-0005-0250X050-HC115
Order number: 31152894
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,6 mm; l3:5mm; d1: 0,4 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-004-0005-0500X050-HC115
Order number: 31152895
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,8 mm; l3:3,5mm; d1: 0,5 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-005-0005-0350X050-HC115
Order number: 31152896
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,8 mm; l3:10mm; d1: 0,5 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-005-0005-1000X050-HC115
Order number: 31152899
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,8 mm; l3:5mm; d1: 0,5 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-005-0005-0500X050-HC115
Order number: 31152897
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,8 mm; l3:7mm; d1: 0,5 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-005-0005-0700X050-HC115
Order number: 31152898
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,9 mm; l3:3,5mm; d1: 0,6 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-006-0005-0350X050-HC115
Order number: 31152900
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,9 mm; l3:7mm; d1: 0,6 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-006-0005-0700X050-HC115
Order number: 31152901
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,9 mm; l3:9mm; d1: 0,6 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-006-0005-0900X050-HC115
Order number: 31152902
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,9 mm; l3:12mm; d1: 0,6 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-006-0005-1200X050-HC115
Order number: 31152903
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 1,2 mm; l3:12mm; d1: 0,8 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-008-0005-1200X050-HC115
Order number: 31152906
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 1,2 mm; l3:16mm; d1: 0,8 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-008-0005-1600X050-HC115
Order number: 31152907
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 1,2 mm; l3:5mm; d1: 0,8 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-008-0005-0500X050-HC115
Order number: 31152904
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 1,2 mm; l3:10mm; d1: 0,8 mm; d2:4 mm; R: 0,05 mm; z: 2; MCR111-008-0005-1000X050-HC115
Order number: 31152905
In Stock
