OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,5 mm; l3:1,2 mm; d1: 0,3 mm; d2:4 mm; R: 0,15 mm; z: 2; MBN110-003-0015-0120X050-HC115
Order number: 31152806
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,5 mm; l3:2 mm; d1: 0,3 mm; d2:4 mm; R: 0,15 mm; z: 2; MBN110-003-0015-0200X050-HC115
Order number: 31152807
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,5 mm; l3:3 mm; d1: 0,3 mm; d2:4 mm; R: 0,15 mm; z: 2; MBN110-003-0015-0300X050-HC115
Order number: 31152808
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 4 mm; l3:25 mm; d1: 2 mm; d2:4 mm; R: 1 mm; z: 2; MBN110-020-0100-2500X075-HC116
Order number: 31152842
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 4 mm; l3:10 mm; d1: 2 mm; d2:4 mm; R: 1 mm; z: 2; MBN110-020-0100-1000X050-HC116
Order number: 31152839
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 4 mm; l3:15 mm; d1: 2 mm; d2:4 mm; R: 1 mm; z: 2; MBN110-020-0100-1500X050-HC116
Order number: 31152840
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 4 mm; l3:20 mm; d1: 2 mm; d2:4 mm; R: 1 mm; z: 2; MBN110-020-0100-2000X075-HC116
Order number: 31152841
In Stock
