OptiMill®-3D-BN-Copper
The OptiMill®-3D-BN-Copper ball nose end mill has been specially developed for machining copper electrodes and tough non-ferrous alloys. Copper alloys are comparatively expensive and are used for finishing.T he solid carbide end mill with special geometries from MAPAL guarantees highly precise machining results here.
Selected facets:
- 0.4 Corner radius (R)
- 0.78 Corner radius (R)
- 0.5 Corner radius (R)
- 0.2 Corner radius (R)
- 0.59 Corner radius (R)
- 10.0 Corner radius (R)
- 0.24 Corner radius (R)
- 0.75 Corner radius (R)
- 0.25 Corner radius (R)
- 1.0 Corner radius (R)
- 5.0 Corner radius (R)
- 6 Number of cutting edges
- 2 Number of cutting edges
- OptiMill®-3D-BN-Copper family
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Copper
l1: 50 mm; l2: 1,5 mm; l3:0mm; d1: 1 mm; d2:4 mm; R: 0,5 mm; z: 2; MBN113-010-0050-X050-HU318
Order number: 31153061
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 2,5 mm; l3:0mm; d1: 1,5 mm; d2:6 mm; R: 0,75 mm; z: 2; MBN113-015-0075-X057-HU318
Order number: 31153062
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 3 mm; l3:0mm; d1: 2 mm; d2:6 mm; R: 1 mm; z: 2; MBN113-020-0100-X057-HP804
Order number: 31153063
In Stock -
OptiMill®-3D-BN-Copper
l1: 72 mm; l2: 15 mm; l3:0mm; d1: 10 mm; d2:10 mm; R: 5 mm; z: 2; MBN113-100-0500-X072-HP804
Order number: 31153071
In Stock
