OptiMill®-3D-HF
The OptiMill®-3D-HF high feed milling cutter was specially developed for roughing components with a hardness of up to 55 HRC. The high feed cutter is characterised by its proven face geometry and smooth running and is ideally suited for high feed machining with large metal removal rates and high process reliability.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Shank type
-
Cooling
-
Product Family
-
Product category
(8)
(4)
(8)
(1)-
OptiMill®-3D-HF
l1: 75 mm; l2: 8 mm; l3: 40 mm; d1: 8 mm; d2: 8 mm; R: 0,4 mm; z: 4 ; MHF101-080-0700-4000X075-HP806
Order number: 31150932
In Stock -
OptiMill®-3D-HF
l1: 64 mm; l2: 8 mm; l3: 32 mm; d1: 8 mm; d2: 8 mm; R: 0,4 mm; z: 4 ; MHF101-080-0700-3200X064-HP806
Order number: 31150931
In Stock -
OptiMill®-3D-HF
l1: 64 mm; l2: 8 mm; l3: 32 mm; d1: 8 mm; d2: 8 mm; R: 0,4 mm; z: 3 ; MHF100-080-0700-3200X064-HP806
Order number: 31150907
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 8 mm; l3: 40 mm; d1: 8 mm; d2: 8 mm; R: 0,4 mm; z: 3 ; MHF100-080-0700-4000X075-HP806
Order number: 31150908
In Stock -
OptiMill®-3D-HF
l1: 64 mm; l2: 8 mm; l3: 24 mm; d1: 8 mm; d2: 8 mm; R: 0,4 mm; z: 3 ; MHF100-080-0700-2400X064-HP806
Order number: 31150906
In Stock -
OptiMill®-3D-HF
l1: 64 mm; l2: 8 mm; l3: 24 mm; d1: 8 mm; d2: 8 mm; R: 0,4 mm; z: 4 ; MHF101-080-0700-2400X064-HP806
Order number: 31150930
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 16 mm; l3: 48 mm; d1: 16 mm; d2: 16 mm; R: 0,8 mm; z: 3 ; MHF100-160-1400-4800X100-HP806
Order number: 31150915
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 16 mm; l3: 48 mm; d1: 16 mm; d2: 16 mm; R: 0,8 mm; z: 4 ; MHF101-160-1000-4800X100-HP806
Order number: 31150939
In Stock
