OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,4 mm; l3:0,8 mm; d1: 0,2 mm; d2:4 mm; R: 0,1 mm; z: 2; MBN110-002-0010-0080X050-HC115
Order number: 31152804
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,4 mm; l3:2 mm; d1: 0,2 mm; d2:4 mm; R: 0,1 mm; z: 2; MBN110-002-0010-0200X050-HC115
Order number: 31152805
In Stock -
OptiMill®-3D-BN-Graphite
l1: 150 mm; l2: 16 mm; l3:60 mm; d1: 8 mm; d2:8 mm; R: 4 mm; z: 2; MBN110-080-0400-6000X150-HC116
Order number: 31152862
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 16 mm; l3:45 mm; d1: 8 mm; d2:8 mm; R: 4 mm; z: 2; MBN110-080-0400-4500X100-HC116
Order number: 31152861
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 6 mm; l3:60 mm; d1: 8 mm; d2:8 mm; R: 4 mm; z: 3; MBN111-080-0400-6000X100-HC116
Order number: 31152880
In Stock -
OptiMill®-3D-BN-Graphite
l1: 63 mm; l2: 16 mm; l3:25 mm; d1: 8 mm; d2:8 mm; R: 4 mm; z: 2; MBN110-080-0400-2500X063-HC116
Order number: 31152860
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 6 mm; l3:45 mm; d1: 8 mm; d2:8 mm; R: 4 mm; z: 3; MBN111-080-0400-4500X075-HC116
Order number: 31152879
In Stock -
OptiMill®-3D-BN-Graphite
l1: 130 mm; l2: 6 mm; l3: 85 mm; d1: 8 mm; d2: 8 mm; R: 4 mm; z: 3; MBN111-080-0400-8500X130-HC116
Order number: 31152881
In Stock
