OptiMill®-Tro-H
The OptiMill®-Tro-H corner milling cutter was specially developed for trochoidal cutting of hardened steel. The milling cutter has five cutting edges with optimised unequal pitch and geometry. These features in combination with the balancing of the cutting part to G2.5 ensure reduced vibrations and high surface finishes. Material-specific chip splitters ensure problem-free chip removal.
Ausgewählte Filter:
Alle Filter zurücksetzen-
Material charateristics
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
(4)-
OptiMill®-Tro-H
l1: 93 mm; l2: 36 mm; l3: 45 mm; d1: 12 mm; d2: 12 mm; R: 0,3 mm; z:5; SCM920-1200Z05R-R0030HB-HP827
Bestellnummer: 31053924
sofort lieferbar -
OptiMill®-Tro-H
l1: 99 mm; l2: 42 mm; l3: 50 mm; d1: 14 mm; d2: 14 mm; R: 0,3 mm; z: 5 ; SCM920-1400Z05R-R0030HB-HP827
Bestellnummer: 31053925
sofort lieferbar -
OptiMill®-Tro-H
l1: 108 mm; l2: 48 mm; l3: 55 mm; d1: 16 mm; d2: 16 mm; R: 0,3 mm; z:5; SCM920-1600Z05R-R0030HB-HP827
Bestellnummer: 31053926
sofort lieferbar -
OptiMill®-Tro-H
l1: 126 mm; l2: 60 mm; l3: 70 mm; d1: 20 mm; d2: 20 mm; R: 0,3 mm; z: 5 ; SCM920-2000Z05R-R0030HB-HP827
Bestellnummer: 31053928
sofort lieferbar
