OptiMill®-3D-CR-Alu
The OptiMill®-3D-CR-Alu corner radius milling cutter was specially developed for machining high-strength aluminium alloys. Thanks to its positive and partially polished cutting edges, it is ideally suited for high-precision machining of 3D contours.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-CR-Alu
l1: 50 mm; l2: 2 mm; l3:10mm; d1: 2 mm; d2:4 mm; R: 0,2 mm; z: 2; MCR120-020-0020-1000X050-HP807
Order number: 31153211
In Stock -
OptiMill®-3D-CR-Alu
l1: 50 mm; l2: 2 mm; l3:0mm; d1: 2 mm; d2:4 mm; R: 0,2 mm; z: 2; MCR119-020-0020-X050-HP807
Order number: 31153205
In Stock -
OptiMill®-3D-CR-Alu
l1: 50 mm; l2: 3 mm; l3:12mm; d1: 3 mm; d2:4 mm; R: 0,2 mm; z: 2; MCR120-030-0020-1200X050-HP807
Order number: 31153213
In Stock -
OptiMill®-3D-CR-Alu
l1: 50 mm; l2: 3 mm; l3:0mm; d1: 3 mm; d2:4 mm; R: 0,2 mm; z: 2; MCR119-030-0020-X050-HP807
Order number: 31153207
In Stock -
OptiMill®-3D-CR-Alu
l1: 50 mm; l2: 4 mm; l3:0mm; d1: 4 mm; d2:4 mm; R: 0,2 mm; z: 2; MCR119-040-0020-X050-HP807
Order number: 31153209
In Stock -
OptiMill®-3D-CR-Alu
l1: 50 mm; l2: 4 mm; l3:15mm; d1: 4 mm; d2:4 mm; R: 0,2 mm; z: 2; MCR120-040-0020-1500X050-HP807
Order number: 31153215
In Stock -
OptiMill®-3D-CR-Alu
l1: 57 mm; l2: 5 mm; l3:21mm; d1: 5 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR120-050-0020-2100X057-HP807
Order number: 31153217
In Stock -
OptiMill®-3D-CR-Alu
l1: 57 mm; l2: 6 mm; l3:21mm; d1: 6 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR120-060-0020-2100X057-HP807
Order number: 31153219
In Stock
