OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,6 mm; l3:2,5 mm; d1: 0,4 mm; d2:4 mm; R: 0,2 mm; z: 2; MBN110-004-0020-0250X050-HC115
Order number: 31152810
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,6 mm; l3:1,2 mm; d1: 0,4 mm; d2:4 mm; R: 0,2 mm; z: 2; MBN110-004-0020-0120X050-HC115
Order number: 31152809
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,6 mm; l3:5 mm; d1: 0,4 mm; d2:4 mm; R: 0,2 mm; z: 2; MBN110-004-0020-0500X050-HC115
Order number: 31152811
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 10 mm; l3:45 mm; d1: 5 mm; d2:6 mm; R: 2,5 mm; z: 2; MBN110-050-0250-4500X100-HC116
Order number: 31152854
In Stock -
OptiMill®-3D-BN-Graphite
l1: 57 mm; l2: 10 mm; l3:25 mm; d1: 5 mm; d2:6 mm; R: 2,5 mm; z: 2; MBN110-050-0250-2500X057-HC116
Order number: 31152853
In Stock -
OptiMill®-3D-BN-Graphite
l1: 60 mm; l2: 4 mm; l3:30 mm; d1: 5 mm; d2:6 mm; R: 2,5 mm; z: 3; MBN111-050-0250-3000X060-HC116
Order number: 31152873
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 4 mm; l3:40 mm; d1: 5 mm; d2:6 mm; R: 2,5 mm; z: 3; MBN111-050-0250-4000X075-HC116
Order number: 31152874
In Stock
