OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
- 0.2 Corner radius (R)
- 0.34 Corner radius (R)
- 0.7 Corner radius (R)
- 0.78 Corner radius (R)
- 4 Number of cutting edges
- 6.0 Shank diameter (d2)
- 2 Number of cutting edges
- 0.75 Corner radius (R)
- OptiMill®-3D-CR-Graphite family
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-CR-Graphite
l1: 57 mm; l2: 3 mm; l3:15mm; d1: 3 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-030-0020-1500X057-HC116
Order number: 31152937
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:45mm; d1: 3 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-030-0020-4500X075-HC116
Order number: 31152941
In Stock -
OptiMill®-3D-CR-Graphite
l1: 57 mm; l2: 3 mm; l3:10mm; d1: 3 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-030-0020-1000X057-HC116
Order number: 31152936
In Stock -
OptiMill®-3D-CR-Graphite
l1: 57 mm; l2: 3 mm; l3:20mm; d1: 3 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-030-0020-2000X057-HC116
Order number: 31152938
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:25mm; d1: 3 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-030-0020-2500X075-HC116
Order number: 31152939
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:30mm; d1: 3 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-030-0020-3000X075-HC116
Order number: 31152940
In Stock -
OptiMill®-3D-CR-Graphite
l1: 57 mm; l2: 4 mm; l3:10mm; d1: 4 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-040-0020-1000X057-HC116
Order number: 31152948
In Stock -
OptiMill®-3D-CR-Graphite
l1: 57 mm; l2: 4 mm; l3:20mm; d1: 4 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-040-0020-2000X057-HC116
Order number: 31152949
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 4 mm; l3:30mm; d1: 4 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-040-0020-3000X075-HC116
Order number: 31152950
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 4 mm; l3:45mm; d1: 4 mm; d2:6 mm; R: 0,2 mm; z: 2; MCR111-040-0020-4500X100-HC116
Order number: 31152951
In Stock
