OptiMill®-3D-HF
The OptiMill®-3D-HF high feed milling cutter was specially developed for roughing components with a hardness of up to 55 HRC. The high feed cutter is characterised by its proven face geometry and smooth running and is ideally suited for high feed machining with large metal removal rates and high process reliability.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Shank diameter (d2)
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
(8)
(4)
(8)
(4)
(8)-
OptiMill®-3D-HF
l1: 60 mm; l2: 4 mm; l3: 12 mm; d1: 4 mm; d2: 6 mm; R: 0,2 mm; z: 3 ; MHF100-040-0300-1200X060-HP806
Order number: 31150900
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 4 mm; l3: 20 mm; d1: 4 mm; d2: 6 mm; R: 0,2 mm; z: 3 ; MHF100-040-0300-2000X060-HP806
Order number: 31150901
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 4 mm; l3: 12 mm; d1: 4 mm; d2: 6 mm; R: 0,2 mm; z: 4 ; MHF101-040-0300-1200X060-HP806
Order number: 31150924
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 4 mm; l3: 20 mm; d1: 4 mm; d2: 6 mm; R: 0,2 mm; z: 4 ; MHF101-040-0300-2000X060-HP806
Order number: 31150925
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 5 mm; l3: 20 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 3 ; MHF100-050-0400-2000X060-HP806
Order number: 31150903
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 5 mm; l3: 20 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF101-050-0400-2000X060-HP806
Order number: 31150927
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 5 mm; l3: 15 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 3 ; MHF100-050-0400-1500X060-HP806
Order number: 31150902
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 5 mm; l3: 15 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF101-050-0400-1500X060-HP806
Order number: 31150926
In Stock
