OptiMill®-3D-HF-Hardened
The OptiMill®-3D-HF-Hardened high feed milling cutter was specially developed for roughing and finishing hardened components with a hardness of up to 66 HRC. Due to the innovative face geometry, the milling cutter achieves very high surface qualities even with interrupted cutting.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Cooling
-
Product Family
-
Product category
(7)
(7)
(7)-
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 3 mm; l3: 9 mm; d1: 3 mm; d2: 4 mm; R: 0,15 mm; z: 4 ; MHF102-030-0278-0900X050-HP810
Order number: 31150944
In Stock -
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 3 mm; l3: 15 mm; d1: 3 mm; d2: 4 mm; R: 0,15 mm; z: 4 ; MHF102-030-0275-1500X050-HP810
Order number: 31150945
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 3 mm; l3: 9 mm; d1: 3 mm; d2: 6 mm; R: 0,15 mm; z: 4 ; MHF102-030-0275-0900X060-HP810
Order number: 31150946
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 3 mm; l3: 15 mm; d1: 3 mm; d2: 6 mm; R: 0,15 mm; z: 4 ; MHF102-030-0275-1500X060-HP810
Order number: 31150947
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 6 mm; l3: 24 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 4 ; MHF102-060-0550-2400X060-HP810
Order number: 31150953
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 6 mm; l3: 24 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 6 ; MHF103-060-0550-2400X060-HP810
Order number: 31150965
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 6 mm; l3: 18 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 6; MHF103-060-0550-1800X060-HP810
Order number: 31150964
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 6 mm; l3: 18 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 4 ; MHF102-060-0550-1800X060-HP810
Order number: 31150952
In Stock
