OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Material charateristics
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
(9)-
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,5 mm; l3:1,2 mm; d1: 0,3 mm; d2:4 mm; R: 0,15 mm; z: 2; MBN110-003-0015-0120X050-HC115
Order number: 31152806
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,5 mm; l3:2 mm; d1: 0,3 mm; d2:4 mm; R: 0,15 mm; z: 2; MBN110-003-0015-0200X050-HC115
Order number: 31152807
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 0,5 mm; l3:3 mm; d1: 0,3 mm; d2:4 mm; R: 0,15 mm; z: 2; MBN110-003-0015-0300X050-HC115
Order number: 31152808
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 20 mm; l3:45 mm; d1: 10 mm; d2:10 mm; R: 5 mm; z: 2; MBN110-100-0500-4500X100-HC116
Order number: 31152864
In Stock -
OptiMill®-3D-BN-Graphite
l1: 125 mm; l2: 20 mm; l3:60 mm; d1: 10 mm; d2:10 mm; R: 5 mm; z: 2; MBN110-100-0500-6000X125-HC116
Order number: 31152865
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 10 mm; l3:50 mm; d1: 10 mm; d2:10 mm; R: 5 mm; z: 3; MBN111-100-0500-5000X100-HC116
Order number: 31152883
In Stock -
OptiMill®-3D-BN-Graphite
l1: 72 mm; l2: 20 mm; l3:25 mm; d1: 10 mm; d2:10 mm; R: 5 mm; z: 2; MBN110-100-0500-2500X072-HC116
Order number: 31152863
In Stock -
OptiMill®-3D-BN-Graphite
l1: 72 mm; l2: 10 mm; l3:25 mm; d1: 10 mm; d2:10 mm; R: 5 mm; z: 3; MBN111-100-0500-2500X072-HC116
Order number: 31152882
In Stock -
OptiMill®-3D-BN-Graphite
l1: 130 mm; l2: 10 mm; l3: 85 mm; d1: 10 mm; d2: 10 mm; R: 5 mm; z: 3; MBN111-100-0500-8500X130-HC116
Order number: 31152884
In Stock
