OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
Remove all filters-
Material charateristics
-
Milling type
-
Diameter (d1)
-
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
(11)-
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 1,5 mm; l3:5mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR111-010-0010-0500X050-HC116
Order number: 31152908
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 0,95 mm; l3:20mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR112-010-0010-2000X075-HC116
Order number: 31180367
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 1,5 mm; l3:15mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR111-010-0010-1500X050-HC116
Order number: 31152910
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 1,5 mm; l3:10mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR111-010-0010-1000X050-HC116
Order number: 31152909
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,95 mm; l3:15mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR112-010-0010-1500X050-HC116
Order number: 31180366
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,95 mm; l3:10mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR112-010-0010-1000X050-HC116
Order number: 31180365
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 1,5 mm; l3:20mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR111-010-0010-2000X075-HC116
Order number: 31152911
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 0,95 mm; l3:5mm; d1: 1 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR112-010-0010-0500X050-HC116
Order number: 31180364
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 2,3 mm; l3:20mm; d1: 1,5 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR111-015-0010-2000X050-HC116
Order number: 31152917
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 2,3 mm; l3:10mm; d1: 1,5 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR111-015-0010-1000X050-HC116
Order number: 31152915
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 2,3 mm; l3:15mm; d1: 1,5 mm; d2:4 mm; R: 0,1 mm; z: 2; MCR111-015-0010-1500X050-HC116
Order number: 31152916
In Stock
