OptiMill®-Tro-H
The OptiMill®-Tro-H corner milling cutter was specially developed for trochoidal cutting of hardened steel. The milling cutter has five cutting edges with optimised unequal pitch and geometry. These features in combination with the balancing of the cutting part to G2.5 ensure reduced vibrations and high surface finishes. Material-specific chip splitters ensure problem-free chip removal.
Selected facets:
- 0.1 Corner radius (R)
- 0.15 Corner radius (R)
- 0.3 Corner radius (R)
- 0.32 Corner radius (R)
- OptiMill®-Tro-H family
- 5 Number of cutting edges
-
Material charateristics
-
Material charateristics
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-Tro-H
l1: 62 mm; l2: 18 mm; l3: 25 mm; d1: 6 mm; d2: 6 mm; R: 0,1 mm; z:5; SCM920-0600Z05R-R0010HB-HP827
Order number: 31053921
In Stock -
OptiMill®-Tro-H
l1: 93 mm; l2: 36 mm; l3: 45 mm; d1: 12 mm; d2: 12 mm; R: 0,3 mm; z:5; SCM920-1200Z05R-R0030HB-HP827
Order number: 31053924
In Stock -
OptiMill®-Tro-H
l1: 99 mm; l2: 42 mm; l3: 50 mm; d1: 14 mm; d2: 14 mm; R: 0,3 mm; z: 5 ; SCM920-1400Z05R-R0030HB-HP827
Order number: 31053925
In Stock -
OptiMill®-Tro-H
l1: 108 mm; l2: 48 mm; l3: 55 mm; d1: 16 mm; d2: 16 mm; R: 0,3 mm; z:5; SCM920-1600Z05R-R0030HB-HP827
Order number: 31053926
In Stock -
OptiMill®-Tro-H
l1: 126 mm; l2: 60 mm; l3: 70 mm; d1: 20 mm; d2: 20 mm; R: 0,3 mm; z: 5 ; SCM920-2000Z05R-R0030HB-HP827
Order number: 31053928
In Stock
