OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 3 mm; l3:10mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-1000X050-HC116
Order number: 31152931
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 3 mm; l3:15mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-1500X050-HC116
Order number: 31152932
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:20mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-2000X075-HC116
Order number: 31152933
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:25mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-2500X075-HC116
Order number: 31152934
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:30mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-3000X075-HC116
Order number: 31152935
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 2,4 mm; l3:25mm; d1: 3 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-030-0050-2500D075-HC116
Order number: 31153003
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 2,4 mm; l3:30mm; d1: 3 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-030-0050-3000D075-HC116
Order number: 31153004
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 2,4 mm; l3:20mm; d1: 3 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-030-0050-2000D075-HC116
Order number: 31153002
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 2,4 mm; l3:10mm; d1: 3 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-030-0050-1000D050-HC116
Order number: 31153000
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 2,4 mm; l3:15mm; d1: 3 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-030-0050-1500D050-HC116
Order number: 31153001
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3,2 mm; l3: 25 mm; d1: 4 mm; d2: 4 mm; R: 0,5 mm; z:4; MCR116-040-0050-2500X075-HC116
Order number: 31153041
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3,2 mm; l3:25mm; d1: 4 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-040-0050-2500D075-HC116
Order number: 31153007
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 3,2 mm; l3:10mm; d1: 4 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-040-0050-1000D050-HC116
Order number: 31153005
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3,2 mm; l3:20mm; d1: 4 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-040-0050-2000D075-HC116
Order number: 31153006
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 3,2 mm; l3:45mm; d1: 4 mm; d2:4 mm; R: 0,5 mm; z: 3; MCR114-040-0050-4500D100-HC116
Order number: 31153008
In Stock
