OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
Remove all filters-
Milling type
-
Total length (l1)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 18 mm; l3: 45 mm; d1: 12 mm; d2: 12 mm; R: 1 mm; z:4; MCR115-120-0100-4500X100-HC116
Order number: 31153040
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 18 mm; l3: 45 mm; d1: 12 mm; d2: 12 mm; R: 0,5 mm; z:4; MCR115-120-0050-4500X100-HC116
Order number: 31153037
In Stock -
OptiMill®-3D-CR-Graphite
l1: 83 mm; l2: 18 mm; l3: 25 mm; d1: 12 mm; d2: 12 mm; R: 0,5 mm; z:4; MCR115-120-0050-2500X083-HC116
Order number: 31153036
In Stock -
OptiMill®-3D-CR-Graphite
l1: 83 mm; l2: 18 mm; l3: 25 mm; d1: 12 mm; d2: 12 mm; R: 1 mm; z:4; MCR115-120-0100-2500X083-HC116
Order number: 31153039
In Stock -
OptiMill®-3D-CR-Graphite
l1: 150 mm; l2: 18 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 0,5 mm; z:4; MCR115-120-0050-6000X150-HC116
Order number: 31153038
In Stock -
OptiMill®-3D-CR-Graphite
l1: 83 mm; l2: 18 mm; l3:25mm; d1: 12 mm; d2:12 mm; R: 0,5 mm; z: 3; MCR113-120-0050-2500D083-HC116
Order number: 31152994
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 18 mm; l3:45mm; d1: 12 mm; d2:12 mm; R: 0,5 mm; z: 3; MCR113-120-0050-4500D100-HC116
Order number: 31152995
In Stock -
OptiMill®-3D-CR-Graphite
l1: 83 mm; l2: 18 mm; l3:25mm; d1: 12 mm; d2:12 mm; R: 1 mm; z: 3; MCR113-120-0100-2500D083-HC116
Order number: 31152997
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 18 mm; l3:45mm; d1: 12 mm; d2:12 mm; R: 1 mm; z: 3; MCR113-120-0100-4500D100-HC116
Order number: 31152998
In Stock -
OptiMill®-3D-CR-Graphite
l1: 150 mm; l2: 18 mm; l3:60mm; d1: 12 mm; d2:12 mm; R: 1 mm; z: 3; MCR113-120-0100-6000D150-HC116
Order number: 31152999
In Stock
