OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 6 mm; l3: 25 mm; d1: 4 mm; d2: 4 mm; R: 0,2 mm; z:4; MCR115-040-0020-2500X075-HC116
Order number: 31153020
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 6 mm; l3: 25 mm; d1: 4 mm; d2: 4 mm; R: 1 mm; z:4; MCR115-040-0100-2500X075-HC116
Order number: 31153021
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3,2 mm; l3: 25 mm; d1: 4 mm; d2: 4 mm; R: 0,5 mm; z:4; MCR116-040-0050-2500X075-HC116
Order number: 31153041
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 9 mm; l3: 45 mm; d1: 6 mm; d2: 6 mm; R: 1 mm; z:4; MCR115-060-0100-4500X100-HC116
Order number: 31153025
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 9 mm; l3: 30 mm; d1: 6 mm; d2: 6 mm; R: 1 mm; z:4; MCR115-060-0100-3000X075-HC116
Order number: 31153024
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 9 mm; l3: 45 mm; d1: 6 mm; d2: 6 mm; R: 0,5 mm; z:4; MCR115-060-0050-4500X100-HC116
Order number: 31153023
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 4,8 mm; l3: 45 mm; d1: 6 mm; d2: 6 mm; R: 0,5 mm; z:4; MCR116-060-0050-4500X100-HC116
Order number: 31153043
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 9 mm; l3: 30 mm; d1: 6 mm; d2: 6 mm; R: 0,5 mm; z:4; MCR115-060-0050-3000X075-HC116
Order number: 31153022
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 4,8 mm; l3: 30 mm; d1: 6 mm; d2: 6 mm; R: 0,5 mm; z:4; MCR116-060-0050-3000X075-HC116
Order number: 31153042
In Stock -
OptiMill®-3D-CR-Graphite
l1: 150 mm; l2: 12 mm; l3: 60 mm; d1: 8 mm; d2: 8 mm; R: 0,5 mm; z:4; MCR115-080-0050-6000X150-HC116
Order number: 31153028
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 6,4 mm; l3: 45 mm; d1: 8 mm; d2: 8 mm; R: 0,5 mm; z:4; MCR116-080-0050-4500X100-HC116
Order number: 31153044
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 12 mm; l3: 45 mm; d1: 8 mm; d2: 8 mm; R: 0,5 mm; z:4; MCR115-080-0050-4500X100-HC116
Order number: 31153027
In Stock -
OptiMill®-3D-CR-Graphite
l1: 63 mm; l2: 12 mm; l3: 20 mm; d1: 8 mm; d2: 8 mm; R: 0,5 mm; z:4; MCR115-080-0050-2000X063-HC116
Order number: 31153026
In Stock -
OptiMill®-3D-CR-Graphite
l1: 150 mm; l2: 6,4 mm; l3: 60 mm; d1: 8 mm; d2: 8 mm; R: 0,5 mm; z:4; MCR116-080-0050-6000X150-HC116
Order number: 31153045
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 12 mm; l3: 45 mm; d1: 8 mm; d2: 8 mm; R: 1 mm; z:4; MCR115-080-0100-4500X100-HC116
Order number: 31153030
In Stock
