OptiMill®-Uni-Wave
The OptiMill®-Uni-Wave corner milling cutter was specially developed for roughing steel and cast iron. Due to its innovative cord profile, it enables very short chips and very good chip removal. An uneven tool pitch favours smooth running and reduces vibrations. The five-flute cutter impresses with up to 25 percent higher process efficiency compared to a four-flute cutter.
Selected facets:
- external cooling Cooling
- 0.8 Corner bevel width Cx45°
- 6.0 Corner bevel width Cx45°
- OptiMill®-Uni-Wave family
-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
(7)
(7)
(7)-
OptiMill®-Uni-Wave
l1: 150 mm; l2: 36 mm; l3: 100 mm; d1: 16 mm; d2: 16 mm; Cx45°: 0,8 mm; z: 5 ; SCM910-1600Z05R-F0080HB-HP723
Order number: 31096365
In Stock -
OptiMill®-Uni-Wave
l1: 82 mm; l2: 22 mm; d1: 16 mm; d2: 16 mm; Cx45°: 0,8 mm; z: 5 ; SCM890-1600Z05R-F0080HB-HP723
Order number: 30917931
In Stock -
OptiMill®-Uni-Wave
l1:123 mm; l2: 64 mm;l3: ; d1: 16 mm; d2:16 mm; Cx45°: 0,8; z: 5; SCM900-1600Z05R-F0080HB4-HP723
Order number: 31200329
In Stock -
OptiMill®-Uni-Wave
l1:136 mm; l2: 80 mm;l3: ; d1: 16 mm; d2:16 mm; Cx45°: 0,8; z: 5; SCM900-1600Z05R-F0080HB5-HP723
Order number: 31240672
In Stock -
OptiMill®-Uni-Wave
l1: 108 mm; l2: 36 mm; l3: 58 mm; d1: 16 mm; d2: 16 mm; Cx45°: 0,8 mm; z: 5 ; SCM900-1600Z05R-F0080HB-HP723
Order number: 31054580
In Stock -
OptiMill®-Uni-Wave
l1: 108 mm; l2: 48 mm; l3: 55 mm; d1: 16 mm; d2: 16 mm; Cx45°: 0,8 mm; z: 5 ; SCM900-1600Z05R-F0080HB3-HP723
Order number: 31054570
In Stock -
OptiMill®-Uni-Wave
l1: 92 mm; l2: 32 mm; l3:42 mm; d1: 16 mm; d2: 16 mm; z:5; SCM880-1600Z05R-F0080HB-HP723
Order number: 30917944
In Stock
