OptiMill®-Uni-Wave
The OptiMill®-Uni-Wave corner milling cutter was specially developed for roughing steel and cast iron. Due to its innovative cord profile, it enables very short chips and very good chip removal. An uneven tool pitch favours smooth running and reduces vibrations. The five-flute cutter impresses with up to 25 percent higher process efficiency compared to a four-flute cutter.
Ausgewählte Filter:
- äußere Kühlmittelzufuhr Cooling
- 0.4 Corner bevel width Cx45°
- 0.12 Corner bevel width Cx45°
- OptiMill®-Uni-Wave family
-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
(7)
(7)
(7)-
OptiMill®-Uni-Wave
l1: 63 mm; l2: 19 mm; l3:25 mm; d1: 8 mm; d2: 8 mm; z:5; SCM880-0800Z05R-F0040HB-HP723
Bestellnummer: 30917939
sofort lieferbar -
OptiMill®-Uni-Wave
l1: 58 mm; l2: 12 mm; d1: 8 mm; d2: 8 mm; z:5; SCM890-0800Z05R-F0040HB-HP723
Bestellnummer: 30917926
sofort lieferbar -
OptiMill®-Uni-Wave
l1: 68 mm; l2: 24 mm; l3: 30 mm; d1: 8 mm; d2: 8 mm; Cx45°: 0,4 mm; z: 5 ; SCM900-0800Z05R-F0040HB3-HP723
Bestellnummer: 31054556
sofort lieferbar -
OptiMill®-Uni-Wave
l1: 68 mm; l2: 21 mm; l3: 30 mm; d1: 8 mm; d2: 8 mm; Cx45°: 0,4 mm; z: 5 ; SCM900-0800Z05R-F0040HB-HP723
Bestellnummer: 31054576
sofort lieferbar -
OptiMill®-Uni-Wave
l1: 100 mm; l2: 21 mm; l3: 62 mm; d1: 8 mm; d2: 8 mm; Cx45°: 0,4 mm; z: 5 ; SCM910-0800Z05R-F0040HB-HP723
Bestellnummer: 31096362
sofort lieferbar -
OptiMill®-Uni-Wave
l1:74 mm; l2: 32 mm;l3: ; d1: 8 mm; d2:8 mm; Cx45°: 0,4; z: 5; SCM900-0800Z05R-F0040HB4-HP723
Bestellnummer: 31200326
sofort lieferbar -
OptiMill®-Uni-Wave
l1:81 mm; l2: 40 mm;l3: ; d1: 8 mm; d2:8 mm; Cx45°: 0,4; z: 5; SCM900-0800Z05R-F0040HB5-HP723
Bestellnummer: 31240649
kurzfristig nicht verfügbarBenachrichtigen Sie mich, wenn der Artikel wieder auf Lager ist
