OptiMill®-3D-HF-Hardened
The OptiMill®-3D-HF-Hardened high feed milling cutter was specially developed for roughing and finishing hardened components with a hardness of up to 66 HRC. Due to the innovative face geometry, the milling cutter achieves very high surface qualities even with interrupted cutting.
Selected facets:
-
Material charateristics
- 0.1 Corner radius (R)
- 0.05 Corner radius (R)
- 0.32 Corner radius (R)
-
Material charateristics
- 0.45 Corner radius (R)
- 0.02 Corner radius (R)
- 0.98 Corner radius (R)
- 6.0 Shank diameter (d2)
- 0.24 Corner radius (R)
- 16.0 Shank diameter (d2)
- 1.25 Corner radius (R)
- external cooling Cooling
- 0.19 Corner radius (R)
- 0.78 Corner radius (R)
- 10.0 Shank diameter (d2)
- 0.25 Corner radius (R)
- OptiMill®-3D-HF-Hardened family
-
Milling type
-
Diameter (d1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
(4)
(4)-
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-0600X060-HP810
Order number: 31150942
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-1000X060-HP810
Order number: 31150943
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 5 mm; l3: 15 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF102-050-0460-1500X060-HP810
Order number: 31150950
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 5 mm; l3: 20 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF102-050-0460-2000X060-HP810
Order number: 31150951
In Stock
