OptiMill®-Uni-Wave
The OptiMill®-Uni-Wave corner milling cutter was specially developed for roughing steel and cast iron. Due to its innovative cord profile, it enables very short chips and very good chip removal. An uneven tool pitch favours smooth running and reduces vibrations. The five-flute cutter impresses with up to 25 percent higher process efficiency compared to a four-flute cutter.
Selected facets:
-
Material charateristics
-
Material charateristics
- 0.28 Corner bevel width Cx45°
- 5.0 Corner bevel width Cx45°
- 5 Number of cutting edges
- 1.0 Corner bevel width Cx45°
- 7 Number of cutting edges
- OptiMill®-Uni-Wave family
-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
(8)
(8)-
OptiMill®-Uni-Wave
l1: 126 mm; l2: 60 mm; l3: 70 mm; d1: 20 mm; d2: 20 mm; Cx45°: 1 mm; z: 5 ; SCM900-2000Z05R-F0100HB3-HP723
Order number: 31054572
In Stock -
OptiMill®-Uni-Wave
l1: 150 mm; l2: 41 mm; l3: 98 mm; d1: 20 mm; d2: 20 mm; Cx45°: 1 mm; z: 5 ; SCM910-2000Z05R-F0100HB-HP723
Order number: 31096366
In Stock -
OptiMill®-Uni-Wave
l1: 104 mm; l2: 38 mm; d1: 20 mm; d2: 20 mm; Cx45: 1 mm; z: 5; SCM881-2000Z05R-F0100HB-HP920
Order number: 31102756
In Stock -
OptiMill®-Uni-Wave
l1: 104 mm; l2: 38 mm; l3:52 mm; d1: 20 mm; d2: 20 mm; z:5; SCM880-2000Z05R-F0100HB-HP723
Order number: 30917946
In Stock -
OptiMill®-Uni-Wave
l1:140 mm; l2: 80 mm;l3: ; d1: 20 mm; d2:20 mm; Cx45°: 1; z: 5; SCM900-2000Z05R-F0100HB4-HP723
Order number: 31200330
In Stock -
OptiMill®-Uni-Wave
l1: 126 mm; l2: 41 mm; l3: 74 mm; d1: 20 mm; d2: 20 mm; Cx45°: 1 mm; z: 5 ; SCM900-2000Z05R-F0100HB-HP723
Order number: 31054582
In Stock -
OptiMill®-Uni-Wave
l1: 92 mm; l2: 26 mm; d1: 20 mm; d2: 20 mm; Cx45°: 1 mm; z: 5 ; SCM890-2000Z05R-F0100HB-HP723
Order number: 30917933
In Stock -
OptiMill®-Uni-Wave
l1:160 mm; l2: 100 mm;l3: ; d1: 20 mm; d2:20 mm; Cx45°: 1; z: 5; SCM900-2000Z05R-F0100HB5-HP723
Order number: 31240673
currently out of stockInform me when article is back in stock
