OptiMill®-3D-HF-Hardened
The OptiMill®-3D-HF-Hardened high feed milling cutter was specially developed for roughing and finishing hardened components with a hardness of up to 66 HRC. Due to the innovative face geometry, the milling cutter achieves very high surface qualities even with interrupted cutting.
Selected facets:
-
Material charateristics
- Performance-Line Product category
- 0.49 Corner radius (R)
- 0.7 Corner radius (R)
- 0.25 Corner radius (R)
- 6.0 Corner radius (R)
- 0.88 Corner radius (R)
- 1.5 Corner radius (R)
- 0.98 Corner radius (R)
- 0.9 Corner radius (R)
- 0.39 Corner radius (R)
- 0.69 Corner radius (R)
- 0.32 Corner radius (R)
- 4.0 Corner radius (R)
- 2.5 Corner radius (R)
- 0.6 Corner radius (R)
- 0.12 Corner radius (R)
- 4 Number of cutting edges
- OptiMill®-3D-HF-Hardened family
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
(5)
(5)-
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 5 mm; l3: 15 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF102-050-0460-1500X060-HP810
Order number: 31150950
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 5 mm; l3: 20 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF102-050-0460-2000X060-HP810
Order number: 31150951
In Stock -
OptiMill®-3D-HF-Hardened
l1: 75 mm; l2: 12 mm; l3: 36 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF102-120-1110-3600X075-HP810
Order number: 31150960
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 12 mm; l3: 48 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF102-120-1110-4800X100-HP810
Order number: 31150961
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 12 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 0,6 mm; z: 4 ; MHF102-120-1110-6000X100-HP810
Order number: 31150962
In Stock
