OptiMill®-Uni-Wave
The OptiMill®-Uni-Wave corner milling cutter was specially developed for roughing steel and cast iron. Due to its innovative cord profile, it enables very short chips and very good chip removal. An uneven tool pitch favours smooth running and reduces vibrations. The five-flute cutter impresses with up to 25 percent higher process efficiency compared to a four-flute cutter.
Selected facets:
- OptiMill®-Uni-Wave Product Family
- 12.0 Shank diameter (d2)
- OptiMill®-Hardened Product Family
-
Material charateristics
- OptiMill®-Uni-Wave family
-
Milling type
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
(8)
(8)-
OptiMill®-Uni-Wave
l1: 73 mm; l2: 16 mm; d1: 12 mm; d2: 12 mm; z:5; SCM890-1200Z05R-F0060HB-HP723
Order number: 30917929
In Stock -
OptiMill®-Uni-Wave
l1: 93 mm; l2: 36 mm; l3: 45 mm; d1: 12 mm; d2: 12 mm; Cx45°: 0,6 mm; z: 5 ; SCM900-1200Z05R-F0060HB3-HP723
Order number: 31054558
In Stock -
OptiMill®-Uni-Wave
l1: 93 mm; l2: 26 mm; l3: 46 mm; d1: 12 mm; d2: 12 mm; Cx45°: 0,6 mm; z: 5 ; SCM900-1200Z05R-F0060HB-HP723
Order number: 31054578
In Stock -
OptiMill®-Uni-Wave
l1: 120 mm; l2: 26 mm; l3: 73 mm; d1: 12 mm; d2: 12 mm; Cx45°: 0,6 mm; z: 5 ; SCM910-1200Z05R-F0060HB-HP723
Order number: 31096364
In Stock -
OptiMill®-Uni-Wave
l1:100 mm; l2: 48 mm;l3: ; d1: 12 mm; d2:12 mm; Cx45°: 0,6; z: 5; SCM900-1200Z05R-F0060HB4-HP723
Order number: 31200328
In Stock -
OptiMill®-Uni-Wave
l1:112 mm; l2: 60 mm;l3: ; d1: 12 mm; d2:12 mm; Cx45°: 0,6; z: 5; SCM900-1200Z05R-F0060HB5-HP723
Order number: 31240671
In Stock -
OptiMill®-Uni-Wave
l1: 83 mm; l2: 26 mm; d1: 12 mm; d2: 12 mm; Cx45: 0,6 mm; z: 5; SCM881-1200Z05R-F0060HB-HP920
Order number: 31102753
In Stock -
OptiMill®-Uni-Wave
l1: 83 mm; l2: 26 mm; l3:36 mm; d1: 12 mm; d2: 12 mm; z:5; SCM880-1200Z05R-F0060HB-HP723
Order number: 30917942
In Stock
