OptiMill®-Graphite-MT
The OptiMill®-Graphite-MT multi-tooth milling cutter was specially developed for roughing graphite electrodes. The MAPAL multi-tooth cutter is particularly suitable for very high stock removal rates thanks to its diamond coating and up to 16 cutting edges.
Selected facets:
- OPTIMILL®-3D-HF Product Family
- 6.0 Shank diameter (d2)
- OptiMill®-Graphite-MT Product Family
- 12.0 Shank diameter (d2)
- 16.0 Shank diameter (d2)
- OptiMill®-Graphite-MT family
- 10.0 Shank diameter (d2)
-
Material charateristics
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Corner bevel width Cx45°
-
Shank type
-
Cooling
-
Product Family
-
Product category
(7)-
OptiMill®-Graphite-MT
l1: 57 mm; l2: 16 mm; d1: 5 mm; d2: 6 mm; z:8; SCM106-0500ZMVR-HA-HC117
Order number: 31153055
In Stock -
OptiMill®-Graphite-MT
l1: 57 mm; l2: 19 mm; d1: 6 mm; d2: 6 mm; z:10; SCM106-0600ZMVR-HA-HC117
Order number: 31153056
In Stock -
OptiMill®-Graphite-MT
l1: 57 mm; l2: 20 mm; d1: 6 mm; d2: 6 mm; z:2; SCM105-0600ZGVR-HA-HC117
Order number: 31153050
In Stock -
OptiMill®-Graphite-MT
l1: 70 mm; l2: 25 mm; d1: 10 mm; d2: 10 mm; z:2; SCM105-1000ZGVR-HA-HC117
Order number: 31153052
In Stock -
OptiMill®-Graphite-MT
l1: 72 mm; l2: 25 mm; d1: 10 mm; d2: 10 mm; z:14; SCM106-1000ZMVR-HA-HC117
Order number: 31153058
In Stock -
OptiMill®-Graphite-MT
l1: 85 mm; l2: 30 mm; d1: 12 mm; d2: 12 mm; z:2; SCM105-1200ZGVR-HA-HC117
Order number: 31153053
In Stock -
OptiMill®-Graphite-MT
l1: 83 mm; l2: 30 mm; d1: 12 mm; d2: 12 mm; z:16; SCM106-1200ZMVR-HA-HC117
Order number: 31153059
In Stock
