OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
- OptiMill®-3D-CR-Graphite Product Family
- 0.5 Corner radius (R)
- external cooling Cooling
- OptiMill®-3D-CR-Graphite family
- 2 Number of cutting edges
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 3 mm; l3:10mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-1000X050-HC116
Order number: 31152931
In Stock -
OptiMill®-3D-CR-Graphite
l1: 50 mm; l2: 3 mm; l3:15mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-1500X050-HC116
Order number: 31152932
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:20mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-2000X075-HC116
Order number: 31152933
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:25mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-2500X075-HC116
Order number: 31152934
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:30mm; d1: 2 mm; d2:4 mm; R: 0,5 mm; z: 2; MCR111-020-0050-3000X075-HC116
Order number: 31152935
In Stock -
OptiMill®-3D-CR-Graphite
l1: 57 mm; l2: 3 mm; l3:10mm; d1: 3 mm; d2:6 mm; R: 0,5 mm; z: 2; MCR111-030-0050-1000X057-HC116
Order number: 31152945
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:30mm; d1: 3 mm; d2:6 mm; R: 0,5 mm; z: 2; MCR111-030-0050-3000X075-HC116
Order number: 31152946
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 3 mm; l3:45mm; d1: 3 mm; d2:6 mm; R: 0,5 mm; z: 2; MCR111-030-0050-4500X075-HC116
Order number: 31152947
In Stock -
OptiMill®-3D-CR-Graphite
l1: 57 mm; l2: 4 mm; l3:10mm; d1: 4 mm; d2:6 mm; R: 0,5 mm; z: 2; MCR111-040-0050-1000X057-HC116
Order number: 31152955
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 4 mm; l3:45mm; d1: 4 mm; d2:6 mm; R: 0,5 mm; z: 2; MCR111-040-0050-4500X100-HC116
Order number: 31152957
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 4 mm; l3:30mm; d1: 4 mm; d2:6 mm; R: 0,5 mm; z: 2; MCR111-040-0050-3000X075-HC116
Order number: 31152956
In Stock
