OptiMill®-3D-BN-Copper
The OptiMill®-3D-BN-Copper ball nose end mill has been specially developed for machining copper electrodes and tough non-ferrous alloys. Copper alloys are comparatively expensive and are used for finishing.T he solid carbide end mill with special geometries from MAPAL guarantees highly precise machining results here.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Flute length (l2)
-
-
Number of cutting edges
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 2,5 mm; l3:0mm; d1: 1,5 mm; d2:6 mm; R: 0,75 mm; z: 2; MBN113-015-0075-X057-HU318
Order number: 31153062
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 3 mm; l3:0mm; d1: 2 mm; d2:6 mm; R: 1 mm; z: 2; MBN113-020-0100-X057-HP804
Order number: 31153063
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 4 mm; l3:0mm; d1: 2,5 mm; d2:6 mm; R: 1,25 mm; z: 2; MBN113-025-0125-X057-HP804
Order number: 31153064
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 4,5 mm; l3:0mm; d1: 3 mm; d2:6 mm; R: 1,5 mm; z: 2; MBN113-030-0150-X057-HP804
Order number: 31153065
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 6 mm; l3:0mm; d1: 4 mm; d2:6 mm; R: 2 mm; z: 2; MBN113-040-0200-X057-HP804
Order number: 31153066
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 7,5 mm; l3:0mm; d1: 5 mm; d2:6 mm; R: 2,5 mm; z: 2; MBN113-050-0250-X057-HP804
Order number: 31153067
In Stock -
OptiMill®-3D-BN-Copper
l1: 57 mm; l2: 9 mm; l3:0mm; d1: 6 mm; d2:6 mm; R: 3 mm; z: 2; MBN113-060-0300-X057-HP804
Order number: 31153068
In Stock
