OptiMill®-Tro-Inox
The OptiMill-Tro-Inox® corner milling cutter has been specially developed for trochoidal machining of stainless steel. The cutter has six cutting edges with optimized unevenness and geometry. These features, combined with the balancing of the cutting part to G2.5, ensure reduced vibration and high surface finishes. Material-specific chip splitters ensure trouble-free chip removal.
Selected facets:
Remove all filters
Material charateristics-
Milling type
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
(5)-
OptiMill®-Tro-Inox
l1: 104 mm; l2: 41 mm; l3: 52 mm; d1: 20 mm; d2:20 mm; R: 0,4 mm; z: 6; SCM292-2000Z06R-F0040HB2-HP826
Order number: 31348633
In Stock -
OptiMill®-Tro-Inox
l1: 126 mm; l2: 60 mm; l3: 70 mm; d1: 20 mm; d2:20 mm; R: 0,4 mm; z: 6; SCM292-2000Z06R-F0040HB3-HP826
Order number: 31348644
In Stock -
OptiMill®-Tro-Inox
l1: 160 mm; l2: 100 mm; l3: ; d1: 20 mm; d2:20 mm; R: 0,4 mm; z: 6; SCM292-2000Z06R-F0040HB5-HP826
Order number: 31348662
In Stock -
OptiMill®-Tro-Inox
l1: 140 mm; l2: 80 mm; l3: ; d1: 20 mm; d2:20 mm; R: 0,4 mm; z: 6; SCM292-2000Z06R-F0040HB4-HP826
Order number: 31348654
currently out of stockInform me when article is back in stock -
OptiMill®-Tro-Inox
l1: 126 mm; l2: 60 mm; l3: 70 mm; d1: 20 mm; d2: 20 mm; Cx45°: 0,4 mm; z: 6; SCM291-2000Z06R-F0040HB3-HP826
Order number: 31504987
currently out of stockInform me when article is back in stock
