OptiMill®-3D-HF-Hardened
The OptiMill®-3D-HF-Hardened high feed milling cutter was specially developed for roughing and finishing hardened components with a hardness of up to 66 HRC. Due to the innovative face geometry, the milling cutter achieves very high surface qualities even with interrupted cutting.
-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Neck length (l3)
-
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-HF-Hardened
l1: 75 mm; l2: 10 mm; l3: 30 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 6 ; MHF103-100-0920-3000X075-HP810
Order number: 31150969
In Stock -
OptiMill®-3D-HF-Hardened
l1: 75 mm; l2: 10 mm; l3: 40 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 6 ; MHF103-100-0920-4000X075-HP810
Order number: 31150970
In Stock -
OptiMill®-3D-HF-Hardened
l1: 75 mm; l2: 10 mm; l3: 30 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 4 ; MHF102-100-0920-3000X075-HP810
Order number: 31150957
In Stock -
OptiMill®-3D-HF-Hardened
l1: 75 mm; l2: 10 mm; l3: 40 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 4 ; MHF102-100-0920-4000X075-HP810
Order number: 31150958
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 10 mm; l3: 50 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 4 ; MHF102-100-0920-5000X100-HP810
Order number: 31150959
In Stock -
OptiMill®-3D-HF-Hardened
l1: 100 mm; l2: 10 mm; l3: 50 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 6 ; MHF103-100-0920-5000X100-HP810
Order number: 31150971
In Stock