OptiMill®-3D-HF
The OptiMill®-3D-HF high feed milling cutter was specially developed for roughing components with a hardness of up to 55 HRC. The high feed cutter is characterised by its proven face geometry and smooth running and is ideally suited for high feed machining with large metal removal rates and high process reliability.
Selected facets:
- OptiMill®-3D-HF family
- 0.25 Corner radius (R)
- 0.5 Corner radius (R)
- 0.3 Corner radius (R)
- 3 Number of cutting edges
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Corner bevel width Cx45°
-
Shank type
-
Cooling
-
Product Family
-
Product category
(7)
(7)
(7)
(2)
(2)-
OptiMill®-3D-HF
l1: 60 mm; l2: 5 mm; l3: 20 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 3 ; MHF100-050-0400-2000X060-HP806
Order number: 31150903
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 5 mm; l3: 15 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 3 ; MHF100-050-0400-1500X060-HP806
Order number: 31150902
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 6 mm; l3: 24 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 3 ; MHF100-060-0500-2400X060-HP806
Order number: 31150905
In Stock -
OptiMill®-3D-HF
l1: 60 mm; l2: 6 mm; l3: 18 mm; d1: 6 mm; d2: 6 mm; R: 0,3 mm; z: 3 ; MHF100-060-0500-1800X060-HP806
Order number: 31150904
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 10 mm; l3: 30 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 3 ; MHF100-100-0850-3000X075-HP806
Order number: 31150909
In Stock -
OptiMill®-3D-HF
l1: 75 mm; l2: 10 mm; l3: 40 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 3 ; MHF100-100-0850-4000X075-HP806
Order number: 31150910
In Stock -
OptiMill®-3D-HF
l1: 100 mm; l2: 10 mm; l3: 50 mm; d1: 10 mm; d2: 10 mm; R: 0,5 mm; z: 3 ; MHF100-100-0850-5000X100-HP806
Order number: 31150911
In Stock
