OptiMill®-3D-CR-Graphite
The OptiMill®-3D-CR-Graphite corner radius milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating which prevents chipping and thus damage to the sensitive profiles even after longer milling.
Selected facets:
Remove all filters-
Milling type
-
Total length (l1)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 9 mm; l3:45mm; d1: 6 mm; d2:6 mm; R: 1 mm; z: 3; MCR113-060-0100-4500D100-HC116
Order number: 31152980
In Stock -
OptiMill®-3D-CR-Graphite
l1: 150 mm; l2: 9 mm; l3:60mm; d1: 6 mm; d2:6 mm; R: 1 mm; z: 3; MCR113-060-0100-6000D150-HC116
Order number: 31152981
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 9 mm; l3: 30 mm; d1: 6 mm; d2: 6 mm; R: 1 mm; z:4; MCR115-060-0100-3000X075-HC116
Order number: 31153024
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 9 mm; l3:25mm; d1: 6 mm; d2:6 mm; R: 1 mm; z: 3; MCR113-060-0100-2500D075-HC116
Order number: 31152978
In Stock -
OptiMill®-3D-CR-Graphite
l1: 100 mm; l2: 9 mm; l3: 45 mm; d1: 6 mm; d2: 6 mm; R: 1 mm; z:4; MCR115-060-0100-4500X100-HC116
Order number: 31153025
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 9 mm; l3:30mm; d1: 6 mm; d2:6 mm; R: 1 mm; z: 3; MCR113-060-0100-3000D075-HC116
Order number: 31152979
In Stock -
OptiMill®-3D-CR-Graphite
l1: 75 mm; l2: 9 mm; l3:20mm; d1: 6 mm; d2:6 mm; R: 1 mm; z: 3; MCR113-060-0100-2000D075-HC116
Order number: 31152977
In Stock
