OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
Selected facets:
Remove all filters-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 1,2 mm; l3:12 mm; d1: 0,8 mm; d2:4 mm; R: 0,4 mm; z: 2; MBN110-008-0040-1200X050-HC115
Order number: 31152825
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 1,2 mm; l3:16 mm; d1: 0,8 mm; d2:4 mm; R: 0,4 mm; z: 2; MBN110-008-0040-1600X050-HC115
Order number: 31152826
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 1,2 mm; l3:5 mm; d1: 0,8 mm; d2:4 mm; R: 0,4 mm; z: 2; MBN110-008-0040-0500X050-HC115
Order number: 31152823
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 1,2 mm; l3:10 mm; d1: 0,8 mm; d2:4 mm; R: 0,4 mm; z: 2; MBN110-008-0040-1000X050-HC115
Order number: 31152824
In Stock -
OptiMill®-3D-BN-Graphite
l1: 130 mm; l2: 12 mm; l3: 85 mm; d1: 12 mm; d2: 12 mm; R: 6 mm; z: 3; MBN111-120-0600-8500X130-HC116
Order number: 31152886
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 12 mm; l3: 60 mm; d1: 12 mm; d2: 12 mm; R: 6 mm; z: 3; MBN111-120-0600-6000X100-HC116
Order number: 31152885
In Stock
