OptiMill®-3D-BN-Graphite
The OptiMill®-3D-BN-Graphite ball milling cutter was specially developed for machining graphite electrodes. It is characterised by a special geometry and diamond coating, which prevents chipping and thus damage to the sensitive profiles even after prolonged milling.
-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 3 mm; l3:40 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 3; MBN111-040-0200-4000X075-HC116
Order number: 31152871
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 8 mm; l3:25 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 2; MBN110-040-0200-2500X075-HC116
Order number: 31152851
In Stock -
OptiMill®-3D-BN-Graphite
l1: 60 mm; l2: 3 mm; l3:20 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 3; MBN111-040-0200-2000X060-HC116
Order number: 31152869
In Stock -
OptiMill®-3D-BN-Graphite
l1: 50 mm; l2: 8 mm; l3:15 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 2; MBN110-040-0200-1500X050-HC116
Order number: 31152849
In Stock -
OptiMill®-3D-BN-Graphite
l1: 75 mm; l2: 8 mm; l3:20 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 2; MBN110-040-0200-2000X075-HC116
Order number: 31152850
In Stock -
OptiMill®-3D-BN-Graphite
l1: 100 mm; l2: 8 mm; l3:45 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 2; MBN110-040-0200-4500X100-HC116
Order number: 31152852
In Stock -
OptiMill®-3D-BN-Graphite
l1: 60 mm; l2: 3 mm; l3:30 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 3; MBN111-040-0200-3000X060-HC116
Order number: 31152870
In Stock -
OptiMill®-3D-BN-Graphite
l1: 85 mm; l2: 3 mm; l3:50 mm; d1: 4 mm; d2:4 mm; R: 2 mm; z: 3; MBN111-040-0200-5000X085-HC116
Order number: 31152872
In Stock
