OptiMill®-3D-BN-Graphite-MT
The OptiMill®-3D-BN-Graphite-MT ball cutter was specially developed for roughing graphite electrodes. The multi-tooth cutter is ideally suited for roughing 3-D contours. Thanks to its diamond coating, the milling cutter enables very high stock removal rates.
-
Milling type
-
Diameter (d1)
-
-
Total length (l1)
-
-
Flute length (l2)
-
-
Shank type
-
Cooling
-
Product Family
-
Product category
-
OptiMill®-3D-BN-Graphite-MT
l1: 57 mm; l2: 12 mm; l3:; d1: 4 mm; d2:6 mm; R: 2 mm; z: 9; MBN112-040-0200-X057-HC117
Order number: 31152887
In Stock -
OptiMill®-3D-BN-Graphite-MT
l1: 57 mm; l2: 15 mm; l3:; d1: 5 mm; d2:6 mm; R: 2,5 mm; z: 10; MBN112-050-0250-X057-HC117
Order number: 31152888
In Stock -
OptiMill®-3D-BN-Graphite-MT
l1: 57 mm; l2: 17 mm; l3:; d1: 6 mm; d2:6 mm; R: 3 mm; z: 10; MBN112-060-0300-X057-HC117
Order number: 31152889
In Stock -
OptiMill®-3D-BN-Graphite-MT
l1: 63 mm; l2: 20 mm; l3:; d1: 8 mm; d2:8 mm; R: 4 mm; z: 12; MBN112-080-0400-X063-HC117
Order number: 31152890
In Stock -
OptiMill®-3D-BN-Graphite-MT
l1: 72 mm; l2: 24 mm; l3:; d1: 10 mm; d2:10 mm; R: 5 mm; z: 12; MBN112-100-0500-X072-HC117
Order number: 31152891
In Stock -
OptiMill®-3D-BN-Graphite-MT
l1: 83 mm; l2: 30 mm; l3:; d1: 12 mm; d2:12 mm; R: 6 mm; z: 16; MBN112-120-0600-X083-HC117
Order number: 31152892
In Stock -
OptiMill®-3D-BN-Graphite-MT
l1: 100 mm; l2: 36 mm; l3:; d1: 16 mm; d2:16 mm; R: 8 mm; z: 20; MBN112-160-0800-X100-HC117
Order number: 31152893
In Stock
