OptiMill®-Uni-Wave
The OptiMill®-Uni-Wave corner milling cutter was specially developed for roughing steel and cast iron. Due to its innovative cord profile, it enables very short chips and very good chip removal. An uneven tool pitch favours smooth running and reduces vibrations. The five-flute cutter impresses with up to 25 percent higher process efficiency compared to a four-flute cutter.
Selected facets:
- 0.5 Corner bevel width Cx45°
- internal cooling Cooling
- OptiMill®-Uni-Wave family
- external cooling Cooling
-
Milling type
-
Shank diameter (d2)
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
(8)
(8)
(8)-
OptiMill®-Uni-Wave
l1: 72 mm; l2: 22 mm; l3:30 mm; d1: 10 mm; d2: 10 mm; z:5; SCM880-1000Z05R-F0050HB-HP723
Order number: 30917941
In Stock -
OptiMill®-Uni-Wave
l1: 66 mm; l2: 14 mm; d1: 10 mm; d2: 10 mm; z:5; SCM890-1000Z05R-F0050HB-HP723
Order number: 30917928
In Stock -
OptiMill®-Uni-Wave
l1: 80 mm; l2: 30 mm; l3: 35 mm; d1: 10 mm; d2: 10 mm; Cx45°: 0,5 mm; z: 5 ; SCM900-1000Z05R-F0050HB3-HP723
Order number: 31054557
In Stock -
OptiMill®-Uni-Wave
l1: 80 mm; l2: 22 mm; l3: 38 mm; d1: 10 mm; d2: 10 mm; Cx45°: 0,5 mm; z: 5 ; SCM900-1000Z05R-F0050HB-HP723
Order number: 31054577
In Stock -
OptiMill®-Uni-Wave
l1: 100 mm; l2: 22 mm; l3: 58 mm; d1: 10 mm; d2: 10 mm; Cx45°: 0,5 mm; z: 5 ; SCM910-1000Z05R-F0050HB-HP723
Order number: 31096363
In Stock -
OptiMill®-Uni-Wave
l1:96 mm; l2: 50 mm;l3: ; d1: 10 mm; d2:10 mm; Cx45°: 0,5; z: 5; SCM900-1000Z05R-F0050HB5-HP723
Order number: 31240670
In Stock -
OptiMill®-Uni-Wave
l1:89 mm; l2: 40 mm;l3: ; d1: 10 mm; d2:10 mm; Cx45°: 0,5; z: 5; SCM900-1000Z05R-F0050HB4-HP723
Order number: 31200327
In Stock -
OptiMill®-Uni-Wave
l1: 72 mm; l2: 22 mm; d1: 10 mm; d2: 10 mm; Cx45: 0,5 mm; z: 5; SCM881-1000Z05R-F0050HB-HP920
Order number: 31102752
In Stock
