OptiMill®-Uni-Wave
The OptiMill®-Uni-Wave corner milling cutter was specially developed for roughing steel and cast iron. Due to its innovative cord profile, it enables very short chips and very good chip removal. An uneven tool pitch favours smooth running and reduces vibrations. The five-flute cutter impresses with up to 25 percent higher process efficiency compared to a four-flute cutter.
Selected facets:
- 0.32 Corner bevel width Cx45°
- 0.7 Corner bevel width Cx45°
- 0.0 Corner bevel width Cx45°
- 3.0 Corner bevel width Cx45°
- 0.025 Corner bevel width Cx45°
- 0.4 Corner bevel width Cx45°
- 0.08 Corner bevel width Cx45°
- 0.45 Corner bevel width Cx45°
- 0.25 Corner bevel width Cx45°
- 0.18 Corner bevel width Cx45°
- 0.04 Corner bevel width Cx45°
- 0.16 Corner bevel width Cx45°
- OptiMill®-Uni-Wave family
- 6.0 Shank diameter (d2)
-
Milling type
-
Total length (l1)
-
-
Flute length (l2)
-
-
Neck length (l3)
-
-
Number of cutting edges
-
Shank type
-
Product Family
-
Product category
(5)
(5)
(5)-
OptiMill®-Uni-Wave
l1: 62 mm; l2: 17 mm; l3: 24 mm; d1: 5 mm; d2: 6 mm; Cx45°: ,25 mm; z: 5 ; SCM900-0500Z05R-F0025HB3-HP723
Order number: 31054554
In Stock -
OptiMill®-Uni-Wave
l1: 62 mm; l2: 13 mm; l3: 24 mm; d1: 5 mm; d2: 6 mm; Cx45°: 0,25 mm; z: 5 ; SCM900-0500Z05R-F0025HB-HP723
Order number: 31054574
In Stock -
OptiMill®-Uni-Wave
l1: 57 mm; l2: 13 mm; d1: 5 mm; d2: 6 mm; Cx45: 0,250 mm; z: 5; SCM881-0500Z05R-F0025HB-HP920
Order number: 31102737
In Stock -
OptiMill®-Uni-Wave
l1: 54 mm; l2: 9 mm; l3: 13 mm; d1: 5 mm; d2: 6 mm; z:5; SCM890-0500Z05R-F0025HB-HP723
Order number: 30917923
In Stock -
OptiMill®-Uni-Wave
l1: 57 mm; l2: 13 mm; l3:19 mm; d1: 5 mm; d2: 6 mm; z:5; SCM880-0500Z05R-F0025HB-HP723
Order number: 30917936
In Stock
