MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 7.0 Shank diameter (d2)
- 20.0 Shank diameter (d2)
- 5xD Drilling depth xD
- 12xD Drilling depth xD
- 25.0 Shank diameter (d2)
- MEGA-180°-Drill family
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(4)
(4)
(4)-
MEGA-180°-Drill
d1: 18,5 mm; d2: 20 mm; l1: 151 mm; l2: 99 mm; l3: 75 mm; z: 2; internal cooling; SCD231-1850-2-4-180HA05-HP230
Order number: 30382877
In Stock -
MEGA-180°-Drill
d1: 19 mm; d2: 20 mm; l1: 151 mm; l2: 99 mm; l3: 75 mm; z: 2; internal cooling; SCD231-1900-2-4-180HA05-HP230
Order number: 30382879
In Stock -
MEGA-180°-Drill
d1: 19,8 mm; d2: 20 mm; l1: 151 mm; l2: 99 mm; l3: 75 mm; z: 2; internal cooling; SCD231-1980-2-4-180HA05-HP230
Order number: 30382881
In Stock -
MEGA-180°-Drill
d1: 20 mm; d2: 20 mm; l1: 151 mm; l2: 99 mm; l3: 75 mm; z: 2; internal cooling; SCD231-2000-2-4-180HA05-HP230
Order number: 30382882
In Stock
